Rothenberger Tee Extractor Set 22124 & Spare Parts

 
HAND TOOLS

Previous PagePrevious PageNext PageNext page

 


Rothenberger tee extractors feature specially polished tempered and burnished forged hooks in a special shape for safe, precision joints installed without having to cut the tube. The tee extractors allow for easy introduction into the drill hole and controlled, uniform manipulation of your material, and no finishing is necessary. They also feature standard specification overlaps and optimum capillary gaps.

The tee extractor bells are nickel-plated and sit with a double vee block for accurate positioning. This gives you precise 90-degree branches every time. You just drill the pilot hole, introduce the tee extractor hook to the drilled hole and firmly screw the bell to the wall of the tube. Next, hold the tee extractor in place while you extract, particularly while make your last final few turns.

 

Rothenberger Tee Extractor Set

Rothenberger TEE-EXTRACTOR Set
Efficient tube installation without fittings in plumbing, refrigeration and air conditioning.

Key features
  • No fittings to buy or store
  • 50% time saving and labor cost
  • 67% saving in brazing time and material
  • Branches can be made on installed tube without dismantling or cutting
  • IAPMO listed

Note: Tees can be pulled size for size up to 1". Larger sizes use one size smaller. If using small sizes to pull tees out of large diameter tube, tube may have to be annealed.

In steel carrying case containing Tee extractor, special ratchet, UNIDRILL Automatic 42 and cam pincer.



inch OD

lbs.
No. $
Price
Add to Cart

 1/2" - 5/8" - 7/8" - 1 1/8"

 8.56  22124 $799.90
       


   

 Rothenberger Extractor Bell
Tee extractor bell with double vee block for accurate positioning producing precision 90° branches.

Rothenberger TEE-EXTRACTORS
Forged hooks, specially polished tempered and burnished. Nickel plated bells. Special hook shape for:
  • Safe, precision joints installed without cutting the tube
  • Easy introduction into the drill hole
  • Controlled and uniform material manipulation
  • Standard specification overlaps and optimum capillary gaps
  • No finishing necessary


TEE-EXTRACTORS 1
Drill the pilot hole using the self centering UNIDRILL automatic set to the correct size.


TEE-EXTRACTORS 2
Introduce the tee extractor hook into the drilled hole and screw the bell firmly to the tube wall.


TEE-EXTRACTORS 3
Hold the tee extractor firmly in place during extracting especially for the final few turns.


TEE-EXTRACTORS 4
Set the branch insert depth with the adjustable cam pincer.

The UNIDRILL Automatic is calibrated for each branch size and is easily adjusted to provide the correct diameter hole for each tube tee extractor hook.




inch OD

max - inch
drill size
inch

ratchet size

lbs.
No. $
Price
Add to Cart

 3/8"  .039  .236  7/16"  .25  22060 $217.90
 1/2"  .039  .276  7/16"  .30  22061 $217.90
 5/8"  .039  .315  7/16"  .44  22016 $217.90
 3/4"  .078  .394  7/16"  .50  22062 $217.90
 7/8"  .078  .472  7/16"  .75  22063 $217.90
 1"  .098  .551  7/16"  1.00  22064 $272.90
 1 1/8"  .098  .591  7/16"  1.60  22065 $272.90
1 1/4" .098 .591 7/16" 1.60 22066 $272.90
 1 3/8"  .098  .866  7/16"  1.60  22035 $272.90
1 1/2" .098 1.024 7/16" 1.60 22038 $272.90
 1 5/8"  .098  1.024  7/16"  2.00  22068 $272.90
1 3/4" .098 1.024 7/16" 2.00 22069 $288.90
2"
Special Order
.098 1.182 3/4" 3.00 22050 $417.90
 2 1/8"
Special Order
 .098  1.182  3/4"  3.00  22054 $524.90
             
 

Rothenberger UNIDRILL

UNIDRILL 42

Rothenberger UNIDRILL® Automatic 42
Exceptional quality HSS drill for rapid, burr-free drilling. Self centering drill tip provides precise location without the need for a center punch.
By adjusting the drill to the required branch size, the hole automatically corresponds to the size required for hook entry. The drill stop prevents oversizing or damage to the tube wall.



mm

inch

ratchet size

lbs.
No. $
Price
Add to Cart

 10 - 42  3/8" - 1 5/8"  7/16"  .94  21575 $399.90
           



Rothenberger Extractor Cam Pincer

Rothenberger Extractor Cam Pincer
For fixing the insertion depth of the branch pipe, and ensuring normal flow characteristics in the main pipe, as well as precise, standard overlap. Nickel coated with scale and cam depth adjustment. Hardened point.



mm

inch

inch

lbs.
No. $
Price
Add to Cart

 10 - 42  1/2" - 1 1/2"  6"  .38  22080 $110.90
          



Rothenberger Extractor Ratchets

Rothenberger Extractor Ratchet
Made from chrome-vanadium steel; fine toothed and reversible right/left.


for
inch OD

ratchet size

lbs.
No. $
Price
Add to Cart

 3/8" - 1 3/4"  7/16"    1.00  22081 $85.90
 2" - 4 1/4"  3/4"      2.63  27181 $167.90
         

   


HAND TOOLS

Previous PagePrevious PageNext PageNext page

 
Rothenberger Tee Extractors

TOLL FREE: 1-866-496-7268
Orders Fax: 1-915-760-4832

 

All content © Copyright 2012 CSC Industrial